Today's postings

  1. [Baren 40533] Re: Burnt plate oil There are so many grades of this,... (Barbara Mason)
  2. [Baren 40534] Printing From Linoleum (Robert Arnold)
  3. [Baren 40535] Re: Printing From Linoleum ( slinders # comcast.net)
  4. [Baren 40536] Re: Printing From Linoleum (Darrell Madis)
  5. [Baren 40537] Re: Burnt plate oil There are so many grades of this,... (Sharri LaPierre)
  6. [Baren 40538] Re: Printing From Linoleum (Barbara Mason)
  7. [Baren 40539] Re: Printing From Linoleum (Ruth Leaf)
  8. [Baren 40540] Re: thank you! Re: Printing From Linoleum (Marilyn Anderson)
  9. [Baren 40541] Baren Member blogs: Update Notification (Blog Manager)
Member image

Message 1
From: Barbara Mason
Date: Sat, 30 Jan 2010 13:35:42 GMT
Subject: [Baren 40533] Re: Burnt plate oil There are so many grades of this,...
Send Message: To this poster

No....it will damage the paper because it has not been "cooked" enough.
You can do it yourself but it is dangerous
http://www.northernlightstudio.com/burnoil.php
...can I send you some plate oil? I have some and almost never use it
My best
Barbara
Member image

Message 2
From: Robert Arnold
Date: Sat, 30 Jan 2010 19:17:18 GMT
Subject: [Baren 40534] Printing From Linoleum
Send Message: To this poster

I am printing some linocuts on a Conrad Etching Press. I have been using
Arches Cover and 88 paper and printing dry. I would like some
recommendations on what to use for blankets or padding to place on top when
I am running it through the press.

Thanks, Robert
Member image

Message 3
From: slinders # comcast.net
Date: Sat, 30 Jan 2010 19:43:25 GMT
Subject: [Baren 40535] Re: Printing From Linoleum
Send Message: To this poster

Robert Arnold wrote:
> I am printing some linocuts on a Conrad Etching Press. I have been using
> Arches Cover and 88 paper and printing dry. I would like some
> recommendations on what to use for blankets or padding to place on top
> when I am running it through the press.
>
> Thanks, Robert

Hi, Robert,

Graphic Chemical and Ink in Villa Park, IL, can supply excellent
blankets! Dean and Susan are good friends of this list. The
blankets aren't inexpensive, but they are beautifully made and
will serve you well, especially if you use them with sizing
catchers, and keep your hands clean!

http://www.graphicchemical.com/shopdisplayproducts.asp?Search=Yes&sppp=25


You'll get suggestions for inexpensive substitutes, but the
quality of the blanket influences the quality of the work that
it's used with. It's difficult to make a blanket that will
give even pressure throughout. You get what you pay for! You
have a good press and will want to have a good blanket!

BTW, have list folks noticed that Pearl is closing or has closed
all of their stores? We need to support our good suppliers!
Graphic has been a good printing resource for tools, inks, and
excellent papers for a very long time!

Best wishes,
Sharen
Member image

Message 4
From: Darrell Madis
Date: Sat, 30 Jan 2010 19:46:28 GMT
Subject: [Baren 40536] Re: Printing From Linoleum
Send Message: To this poster

I use a piece of treadmill belt from a junk treadmill.  Works fine.


           Madis Arts
Member image

Message 5
From: Sharri LaPierre
Date: Sat, 30 Jan 2010 20:06:29 GMT
Subject: [Baren 40537] Re: Burnt plate oil There are so many grades of this,...
Send Message: To this poster

I have always been advised to stay away from the linseed oil from the
hardware store. By now I've forgotten why, but I suspect it is not as
keenly refined and may have some minor impurities. I would advise you
to contact Graphic Chemical and get one of their products recommended
for your purpose. They are very fast and it will be at your doorstep
before you can turn around twice.

Cheers ~
Sharri
Member image

Message 6
From: Barbara Mason
Date: Sat, 30 Jan 2010 20:43:14 GMT
Subject: [Baren 40538] Re: Printing From Linoleum
Send Message: To this poster

Robert,
Use one thickness of mat board and if you see embossing on the paper, at least very much, you have too much pressure...there should be no embossing. If you don't get good prints, you need to fix the ink by adding something to make it looser.
Some people do print with just the stiffest blanket, the top woven one. I like mat board better, it gives you an even print and will not push the paper down into the cuts
My best
Barbara
Member image

Message 7
From: Ruth Leaf
Date: Sun, 31 Jan 2010 01:17:23 GMT
Subject: [Baren 40539] Re: Printing From Linoleum
Send Message: To this poster

you can use old wool blankets of padded newspaper. Thet used
newspaper in Mexico when They couldn't afford blankets. Ruth Leaf
Member image

Message 8
From: Marilyn Anderson
Date: Sun, 31 Jan 2010 04:19:39 GMT
Subject: [Baren 40540] Re: thank you! Re: Printing From Linoleum
Send Message: To this poster

Dear June Leaf,

Am new to Baren. I am amazed at the knowledge and experience out
there! Where I am (Rochester, NY) I have few fellow relief print
makers. It is such a treat to learn about ideas like yours! I lived a
number of years in Guatemala and had profound experiences surrounding
the skills and innate ingenuity of people who made things, every
thing from weaving, (the backstrap loom using sticks as warp "beams"),
furniture making using only a machete, and people who would never
think of buying a wooden spoon but would only think of making one
they needed.

So, the idea of printing my wood and linocuts on my etching press
using either a newspaper blanket. great!

Thanks again,
Marilyn

Digest Appendix

Postings made on [Baren] members' blogs
over the past 24 hours ...

Subject: Ahoy!
Posted by: Jeff Dean

Still untitled, this is the very latest off of the press here at NCP. A ship tossed in angry foaming seas, watched by a sentinel deep in the shroud of fog, this is my favorite print so far.

The image is 6"x4", and is 8 colors of oil-based ink on lightweight off-white French-made paper.

The print was inspired by a quote, now forgotten, concerning hope, which I had read during a particularly dark and worrisome time in December. This image came to me, and I am thrilled that I was able to recreate the image on paper.

While it is common to print from lightest color to darkest, I chose to print the water darkest to lightest, hoping that the water would take on more texture and a more "mottled" appearence, particularly in the foam.
For information on acquiring this or other prints, please visit my etsy.com shop.

This item is taken from the blog Napping Cat Press Woodcut Prints & Greeting Cards.
'Reply' to Baren about this item.